Moisture Barrier Cheese Packaging Film

Moisture Barrier Cheese Packaging Film

Moisture Barrier Cheese Packaging Film is a multilayer skin packaging film for sliced cheese, cheese portions, cheese blocks, and selected hard and semi-hard cheese products. Its structure combines PE-based functional layers, a dedicated moisture-barrier layer, and a Surlyn-based sealing layer.
Send Inquiry
Description
Technical Parameters

Moisture Barrier Cheese Packaging Film is a multilayer skin packaging film for sliced cheese, cheese portions, cheese blocks, and selected hard and semi-hard cheese products. Its structure combines PE-based functional layers, a dedicated moisture-barrier layer, and a Surlyn-based sealing layer.

The film conforms closely to the cheese during skin packaging and seals to a compatible bottom web. Film thickness and layer configuration are selected according to product dimensions, forming depth, moisture requirements, bottom-web material, and sealing conditions.

 

Key Packaging Functions

 

Moisture Barrier
The dedicated barrier layer limits water vapor transmission through the film structure. The required barrier specification is determined by cheese characteristics, storage conditions, and the intended package construction.
Skin Forming
The film follows the product profile during forming, including edges, corners, and compact portions. Thickness and forming characteristics are matched to product geometry and cavity depth.
Heat Sealing
The Surlyn-based sealing layer provides the sealing interface with a compatible tray or bottom web. Seal performance depends on film construction, substrate, temperature, pressure, and dwell time.
Product Visibility
The clear film structure maintains visibility of the cheese surface and package shape, allowing the packed product to remain identifiable after forming.

 

Suitable Cheese Applications

 

Sliced Cheese
Suitable for individual slices and stacked slices where close film contact, controlled moisture transmission, and clear product presentation are required.
Cheese Portions
Applicable to portioned cheese with defined dimensions and compact profiles. Film selection can be adjusted according to portion size and package depth.
Cheese Blocks
Suitable for block formats where the film must conform around product edges while maintaining a continuous sealing area around the package.

Hard and Semi-Hard Cheese
Film construction can be selected according to product moisture characteristics, geometry, storage conditions, and the required moisture-barrier level.

 

Material Structure

 

PE-Based Functional Layers
PE-based layers provide the structural base of the multilayer film and contribute to film handling, forming, and overall package construction.
Moisture-Barrier Layer
A dedicated barrier layer is incorporated to control water vapor transmission. Its specification is selected according to the moisture-control requirement of the finished package.
Surlyn-Based Sealing Layer
The Surlyn-based layer provides the sealing interface with a compatible bottom web or tray. Sealing conditions are established according to the complete material combination.

 

Technical Specifications

 

Parameter

Specification

Product Type

Moisture Barrier Cheese Skin Packaging Film

Film Structure

Multilayer co-extruded film

Functional Layers

PE-based layers + moisture-barrier layer + Surlyn-based sealing layer

Typical Thickness

80 / 100 / 125 / 150 μm

Film Form

Roll stock

Surface

Clear

Application

Cheese skin packaging

Barrier Function

Moisture / water vapor barrier

Sealing Method

Heat sealing

Film Width

Specified according to package format

Roll Length

Specified according to production requirements

Bottom Web

Selected according to sealing compatibility

 

Film Selection Guide

 

Product Dimensions
Length, width, height, weight, and edge profile affect forming requirements and the film thickness required for the package structure.
Moisture Requirement
Cheese composition, moisture level, storage period, and distribution conditions determine the appropriate moisture-barrier specification.
Bottom-Web Material
The top film and bottom material function as one sealing system. Material compatibility should be confirmed before production approval.
Film Thickness
Typical thicknesses are 80, 100, 125, and 150 μm. Selection depends on product geometry, forming depth, package design, and processing conditions.

 

Film Selection Guide

 

Product Dimensions
Length, width, height, weight, and edge profile affect forming requirements and the film thickness required for the package structure.
Moisture Requirement
Cheese composition, moisture level, storage period, and distribution conditions determine the appropriate moisture-barrier specification.
Bottom-Web Material
The top film and bottom material function as one sealing system. Material compatibility should be confirmed before production approval.
Film Thickness
Typical thicknesses are 80, 100, 125, and 150 μm. Selection depends on product geometry, forming depth, package design, and processing conditions.

 

Quality Control

 

Thickness Control
Film thickness is measured against the specified range to maintain consistency between production batches and support stable forming.
Layer Structure
The multilayer construction is checked against the defined functional structure and material specification.
Surface Inspection
Film surfaces are inspected for clarity, uniformity, and visible defects that could affect processing or package appearance.
Roll Inspection
Finished rolls are checked for width, length, winding condition, identification, and outer packaging before release.

 

Packaging and Supply Information

 

Roll Identification
Each roll can carry product and batch identification corresponding to the approved specification and production record.
Specification Matching
Repeat orders can follow an established specification covering thickness, width, roll length, layer structure, application, and packaging format.
Production Planning
Regular supply can be planned around agreed film dimensions, roll configuration, inspection requirements, and order quantities.

 

Buyer Checklist

 

Before requesting a sample or quotation, prepare:
Cheese type and product format
Product length, width, height, and approximate weight
Package dimensions and forming depth
Bottom tray or web material
Required film thickness
Film width and roll length
Packaging and sealing conditions
Required moisture-barrier level
Estimated order quantity and purchasing frequency
These specifications provide the basis for selecting the film structure and roll configuration for the intended package.

 

FAQ

 

Q: What cheese products can use this film?

A: The film is intended for sliced cheese, cheese portions, cheese blocks, and selected hard and semi-hard cheese formats using skin packaging.

Q: What thicknesses are available?

A: Typical thicknesses are 80, 100, 125, and 150 μm. The appropriate option depends on product geometry, forming depth, package construction, and processing conditions.

Q: What creates the moisture-barrier function?

A: A dedicated moisture-barrier layer is incorporated into the multilayer structure. Its specification is selected according to the required water vapor control.

Q: Is the film compatible with different bottom webs?

A: Film selection can be matched to different bottom-web materials. Compatibility should be confirmed because sealing performance depends on the complete material and process combination.

Q: What information is needed before ordering?

A: Key information includes product dimensions, cheese format, package size, forming depth, bottom-web material, film thickness, width, roll length, and required moisture-barrier specification.

Q: Can a film specification be established for repeat orders?

A: Yes. An approved specification can define the film structure, thickness, dimensions, roll configuration, and inspection requirements for repeat purchasing.

Hot Tags: moisture barrier cheese packaging film, China moisture barrier cheese packaging film manufacturers, suppliers, factory, Semi-Hard Cheese Skin Packaging Film